2008 Mercedes CL-Class Owner's Manual - Page 387

Controls in detail Memory function The following settings are stored when using the buttons on the passenger door: Front passenger seat, head restraint high and backrest position Lumbar support (CL 550) Drive-dynamic multicontour seat*: activation/deactivation Storing positions into memory Adjust the seat ( page 368) to the desired position. On the driver's side: adjust the steering wheel ( page 379) and the exterior rear view mirrors ( page 381) to the desired position. Press memory button M. Release memory button M and press one of the memory position buttons 1, 2 or 3 within 3 seconds. All the settings are stored at the selected position. Recalling positions from memory ! Do not operate the power seats using a memory position button if the seat backrest is in an excessively reclined position. Doing so could cause damage to front or rear seats. First move seat backrest to an upright position. Press and hold one of the memory position buttons 1, 2 or 3 until the seat, steering wheel and exterior rear view mirrors have completely moved to the stored positions. i Releasing the memory position button immediately stops movement to the stored positions. The drive-dynamic multicontour front seat* and/or lumbar support (CL 550) will continue to be adjusted. M Memory button 1 2 3 Memory position buttons 386