2008 Mercedes CL-Class Owner's Manual - Page 98

Control systems COMAND introduction i By selecting "LOGIC7® OFF", all compatible formats as they are present on the medium are played back. Due to the vehicle's spatial characteristics, an optimal sound experience is not ensured on all seats. Adjusting surround sound With surround sound, you can choose between "LOGIC7® ON" and "LOGIC7® OFF". Select "Sound" "3D Sound". Selecting a setting: Slide rmq or rotate ymz. Saving setting: Press n. The setting is saved and the menu is closed. Exiting menu without saving changes: Press L or slide omp. With some stereo recordings, the resulting sound may deviate from conventional stereo playback. Switching off/on the audio source i When you insert an audio CD or audio DVD, it automatically becomes the active audio source. i Please note the following: For an ideal sound experience at all seats, the balance and fader should be adjusted to the center of the passenger compartment with LOGIC7® switched on. The best sound results are achieved by playing high-quality audio CDs and audio DVDs. For MP3 tracks, the bit rate should be at least 128 kbit/s. Surround sound does not function for mono-signal sources. Switching off: Select "Audio" dio" "Audio OFF". "Au- The audio source is switched off; "Audio OFF" appears in the display. Switching on: Select "Audio", then the desired audio source. or Load CD/DVD ( page 116) or a PCMCIA card ( page 117). Adjusting surround sound 1 Current setting In the event of poor radio reception quality, e.g. inside a tunnel, you should switch off LOGIC7®, as a dynamic switch from Stereo to Mono could occur, resulting in temporary sound distortion. 97