2008 Mercedes CL-Class Owner's Manual - Page 417
2008 Mercedes CL-Class Manual
Page 417 highlights
Controls in detail Driving and parking i If you drive through an automatic conveyor type car wash, you can switch on the ignition with the KEYLESS-GO button and engage neutral position N or insert the SmartKey into the starter switch. Releasing seat belts Press the seat belt release button ( page 389). Allow the retractor to completely rewind the seat belt by guiding the latch plate. If you have started the engine with the KEYLESS-GO start/stop button and cannot turn it off as described above: Remove the KEYLESS-GO start/stop button from the starter switch. Insert the SmartKey with KEYLESS-GO into the starter switch. The engine turns off. The starter switch is in position 0 ( page 365). ! Make sure the seat belt retracts fully so that the seat belt and/or latch plate cannot get caught or pinched in the door or in the seat mechanism. This can damage the seat belt and impair the effectiveness of the seat belt, and/or cause damage to the door and/or door trim panel. Such damage is not covered by the Mercedes-Benz Limited Warranty. Damaged seat belts must be replaced. Contact an authorized Mercedes-Benz Center. 416
![](/manual_guide/autos/2008-mercedes-clclass-owners-manual-d41737b/417.png)