2008 Mercedes CL-Class Owner's Manual - Page 302
2008 Mercedes CL-Class Manual
Page 302 highlights
Control systems Instrument cluster control system Settings menu Press # again if you would like to change the current status. Depending on the previous status, the daytime running lamps will be switched on or off. With "Daytime Running Lamps" mode selected and the exterior lamp switch at position M or *, the low beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will switch on additionally: Parking lamps Tail lamps License plate lamps Side marker lamps For more information on the daytime running lamp mode ( page 393). i Make sure that the light switch is set to B or * when you switch off the daytime running lamps while driving at night. i The menu overview can be found on ( page 284). In the "Settings" menu, you can: switch the daytime running lamps on or off (USA only) switch the additional speedometer on or off switch the radar sensors* on or off (USA only) Setting daytime running lamp mode (USA only) Showing or hiding additional speedometer You can have an additional digital speedometer shown on the multifunction display. The speed is shown in the unit of kilometers/hour (USA) or miles/hour (Canada). Press ( or & to select the "Settings" menu. Press % or $ to select the "Add. Speedometer" function. Press #. Press # again if you would like to change the current status. Depending on the previous status, the additional speedometer will be switched on or off. i This function is not available in countries where the daytime running lamp mode is mandatory and therefore in a constant mode. Press ( or & to select the "Settings" menu. Press % or $ to select the "Daytime Running Lamps" function. Press #. i If you turn the exterior lamp switch to another position, the corresponding lamp(s) will switch on. 301