2008 Mercedes CL-Class Owner's Manual - Page 701

Practical hints Flat tire Warning! G Only use genuine Mercedes-Benz wheel bolts. Other wheel bolts may come loose. Do not tighten the wheel bolts when the vehicle is raised. Otherwise the vehicle could fall off the jack. ! Wheel bolts 2 must be used when mounting a Minispare wheel. The use of any wheel bolts other than wheel bolts 2 for a Minispare wheel will physically damage the vehicle's brakes. Warning! G Make sure to use the original length wheel bolts when remounting the original wheel after it has been repaired. Guide the Minispare wheel onto the alignment bolt and push it on. Clean contact surfaces of wheel and wheel hub. ! To avoid paint damage, place wheel flat against hub and hold it there while installing first wheel bolt. Insert wheel bolts and tighten them slightly. 1 Wheel bolt for light alloy rims 2 Wheel bolt for Minispare wheel (located in trunk with spare wheel) Unscrew the alignment bolt, install the last wheel bolt and tighten slightly. 700