2008 Mercedes CL-Class Owner's Manual - Page 217

Control systems COMAND navigation system (entering a destination) List of intersections with input characters When this list appears, the input characters 4 are automatically activated. i In the list of input characters 4, you can only select currently selectable characters. Which characters are included depends on the sequence in which you have entered your destination and the data version of the digital map. While the characters are being selected as described below, the top list entry 1 always shows the intersection which best corresponds to the input data as it has been entered up to that point. At the same time, COMAND automatically supplements characters 2 entered by the user with appropriate characters 3. Canceling character entry: Select "Back" in the bottom line and press n. or Press back button L in the center console ( page 84). As soon as COMAND can clearly attribute the characters entered to an intersection, the input characters 4 disappear. You see the list of intersections without the input characters. Here you can confirm the current entry or make another selection. During character entry, you can also manually switch to the list of intersections without input characters at any time. Switching manually to the list of intersections without input characters: Slide qm. or Select ? in the second line from the bottom and press n. 1 Top list entry based on the input data up to that point 2 Characters entered by the user 3 Characters automatically added by the system 4 Input characters 5 Currently non-selectable characters 6 Currently selectable character 7 List of intersections 8 Currently selected character Selecting characters: Slide omp or rotate ymz. Confirming character selection: Press n. Deleting individual characters: Select ) in the bottom line and press n. Deleting an entire entry: Select ) in the bottom line and press n until the entire entry is deleted. 216