2008 Mercedes CL-Class Owner's Manual - Page 556
2008 Mercedes CL-Class Manual
Page 556 highlights
Operation Engine compartment Notes about checking engine oil level When checking the oil level the vehicle must be parked on level ground with the engine at operating temperature, the vehicle must have been stationary for at least 5 minutes with the engine turned off with the engine not at operating temperature yet, the vehicle must have been stationary for at least 30 minutes with the engine turned off Checking engine oil level with the control system (CL 600 and CL 65 AMG) To check the engine oil level via the multifunction display, do the following: One of the following messages will subsequently appear in the multifunction display: "Engine Oil Level OK" "Add 1.0 qts. Engine Oil At Next Refueling" (Canada: "1.0 l") "Add 1.5 qts. Engine Oil At Next Refueling" (Canada: "1.5 l") "Add 2.0 qts. Engine Oil At Next Refueling" (Canada: "2.0 l") i The menu overview can be found on ( page 284). Switch on the ignition ( page 365). Press ( or & to select the menu "Service". Press $ or % to select "Engine Oil Level". Press #. The following message is seen in the multifunction display: "Measuring Engine Oil Level Accurate Only When Vehicle Is Level" i If you want to interrupt the checking procedure, press button L on the multifunction steering wheel. If necessary, add engine oil ( page 557). For more information on engine oil, see the "Technical data" section ( page 733) and ( page 736). 555
![](/manual_guide/autos/2008-mercedes-clclass-owners-manual-d41737b/556.png)