2009 Mercedes E-Class Owner's Manual - Page 114
2009 Mercedes E-Class Manual
Page 114 highlights
Controls in detail Lighting traffic and/or ambient lighting conditions require you to do so. In low ambient lighting conditions, only switch from position U to B with the vehicle at a standstill in a safe location. Switching from U to B will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident. The automatic headlamp feature is only an aid to the driver. The driver is responsible for the operation of the vehicle's lights at all times. X Canada only: High-beam headlamps are only available with the exterior lamp switch in position B. Daytime running lamp mode In Canada, the daytime running lamp mode is mandatory and therefore in a constant mode. In the USA, the daytime running lamp mode is deactivated by default. Activate the daytime running lamp mode using the control system, see "Setting daytime running lamp mode (USA only)" (Y page 153). X Turn the exterior lamp switch to position M or U. When the engine is running, the low-beam headlamps come on. In low ambient lighting conditions, the following lamps will come on additionally: RTail Canada only With the exterior lamp switch in position M or U, you cannot switch on the highbeam headlamps. The high-beam flasher is available at all times. For nighttime driving turn the exterior lamp switch to position B to permit activation of the high-beam headlamps. When the engine is running, and you Rshift from a driving position to park position P with the vehicle at a standstill, the lowbeam headlamps will go out with a delay of 3 minutes Rturn Switching on: Turn the exterior lamp switch to position U. With the SmartKey in starter switch position 1 or the KEYLESS-GO start/stop button pressed once, the tail and parking lamps, the license plate lamps and the side marker lamps will come on and go out depending on the brightness of the ambient light. When the engine is running the low-beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps will come on and go out depending on the brightness of the ambient light. the exterior lamp switch to position C, the low-beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps come on the exterior lamp switch to position B, the manual headlamp mode has priority over the daytime running lamp mode The corresponding exterior lamps come on (Y page 111). lamps lamps plate lamps Rturn RParking RLicense RSide marker lamps With the daytime running lamp mode activated and the engine running, you cannot switch off the low-beam headlamps manually. USA only You can only switch on the high-beam headlamps in low ambient lighting conditions. The high-beam flasher is available at all times. 112