2009 Mercedes E-Class Owner's Manual - Page 155

Controls in detail Control system Setting the date This function is only available if your vehicle is not equipped with navigation module. X Move the selection marker with button æ or ç to the Time/Date submenu. X Press button j or k repeatedly until the message Set Date Month, Set Date Day, or Set Date Year appears in the multifunction display. The selection marker is on the current setting. The following functions are available: RSetting X daytime running lamp mode (USA only) (Y page 153) locator lighting (Y page 154) ambient lighting (Y page 154) RSetting RSetting RSetting night security illumination (Y page 154) interior lighting delayed shut-off (Y page 155) RSetting Press button æ or ç to select manual operation (Manual) or daytime running lamp mode (Constant). With daytime running lamp mode activated and the exterior lamp switch in position M or U, the low-beam headlamps are switched on when the engine is running. In low ambient light conditions the following lamps will come on additionally: RParking RTail lamps plate lamps Example illustration for setting the month X Press button æ or ç to set the month, day, or year. Setting daytime running lamp mode (USA only) X Move the selection marker with button æ or ç to the Lighting submenu. X Press button j or k repeatedly until the message Headlamp Mode appears in the multifunction display. The selection marker is on the current setting. lamps marker lamps RLicense RSide Lighting submenu Access the Lighting submenu via the Settings menu. Use the Lighting submenu to change the lamp and lighting settings on your vehicle. For more information on the daytime running lamp mode, see "Lighting" (Y page 112). For safety reasons, resetting all the functions of all submenus to the factory settings while driving (Y page 149) will not deactivate the daytime running lamp mode. The following message appears in the multifunction display: Lighting - Cannot be completely reset to factory settings while driving. Z 153