2011 Mercedes SL-Class Owner's Manual - Page 127

Control system For safety reasons, resetting all the functions of all submenus to the factory settings while driving (Y page 121) will not deactivate the daytime running lamp mode. The following message appears in the multifunction display: Lighting Cannot be fully reset to factory settings while driving. Switching locator lighting on or off With the locator lighting feature activated and the exterior lamp switch in position Ã, the following lamps will come on during darkness when the vehicle is unlocked using button % on the SmartKey: RParking lamps RTail X 125 Press button W or X to switch the locator lighting function On or Off. X Turn the exterior lamp switch to position à when exiting the vehicle. The locator lighting feature is activated. Switching night security illumination (Headlamps delayed shut-off feature) on or off Use this function to set whether you would like the exterior lamps to remain on for 15 seconds during darkness after exiting the vehicle and closing all doors. With the headlamps delayed shut-off feature activated and the exterior lamp switch in position à before the engine is turned off, the following lamps will come on when the engine is turned off: RParking RTail lamps plate lamps marker lamps fog lamps RLicense RSide lamps plate lamps RFront lamps marker lamps fog lamps The locator lighting goes out when the driver's door is opened. If you do not open the driver's door after unlocking the vehicle with the SmartKey, the lamps will go out automatically after approximately 40 seconds. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Locator Lighting appears in the multifunction display. The selection marker is on the current setting. RLicense RSide RFront If, after turning off the engine, you do not open a door or do not close an opened door, the lamps will automatically go out after 60 seconds. X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button &. X Move the selection marker with button W or X to the Lighting submenu. X Press button & or * repeatedly until the message Headlamps Delayed Switch-off appears in the multifunction display. The selection marker is on the current setting. Z Controls in detail