2011 Mercedes SL-Class Owner's Manual - Page 90

88 Memory function Power-folding exterior rear view mirrors This feature is only available in Canada vehicles. Controls in detail ! Before you drive the vehicle through an automatic car wash, fold in the exterior rear view mirrors. Otherwise they may get damaged. Folding in and out automatically The function must be activated in the Convenience submenu (Y page 127). The exterior rear view mirrors fold in automatically as soon as the vehicle is locked from the outside. The exterior rear view mirrors fold out automatically as soon as the vehicle is unlocked and the driver's or front passenger door is subsequently opened. X Folding in: Briefly press button :. Both exterior rear view mirrors fold in. i At speeds above approximately 60 mph (100 km/h), you will not be able to fold the exterior mirrors in. Memory function Notes With the memory function you can store up to three different configurations per front seat. Each memory position button on the driver's side can store all of the following settings: RSeat Synchronizing The power-folding rear view mirrors may have to be synchronized after the vehicle battery has been disconnected or discharged. If the exterior rear view mirrors do not fold properly upon locking or unlocking the vehicle, do the following: X Make sure the power-folding function in the control system is activated (Y page 127). X Fold each exterior rear view mirror out completely (Y page 88). When the exterior rear view mirrors fold properly upon locking the vehicle, the exterior mirrors are synchronized. Otherwise repeat the above steps. position and lumbar support wheel position rear view mirrors' position RSteering RExterior G Warning! Do not activate the memory function while driving. Activating the memory function while driving could cause the driver to lose control of the vehicle. Folding in and out manually The exterior rear view mirrors can vibrate if they are not folded out completely. Each memory position button on the passenger side can store all of the following settings: RSeat position and lumbar support seat: previously saved RMulticontour settings