2011 Mercedes SL-Class Owner's Manual - Page 94

92 Lighting Locator lighting and night security illumination Locator lighting and night security illumination are described in the "Control system" section, see "Switching locator lighting on or off" (Y page 125) and "Switching night security illumination (Headlamps delayed shut-off feature) on or off" (Y page 125). High beam X Controls in detail Turn the exterior lamp switch to position L (Y page 89). X Switching on: Push the combination switch in direction of arrow :. The high-beam headlamp indicator lamp K in the instrument cluster comes on. X Switching off: Pull the combination switch in direction of arrow = to its original position. Combination switch i Also note the information on high-beam headlamps with activated automatic headlamp mode (Y page 90) or the daytime running lamp mode (Y page 90). High-beam flasher X Switching on: Pull the combination switch briefly in direction of arrow =. Hazard warning flasher Turn signals X Press the combination switch in direction of arrow ; or ?. The corresponding turn signal indicator lamp ! or # in the instrument cluster flashes. The combination switch resets automatically after major steering wheel movements. To signal minor directional changes: X The hazard warning flasher can be switched on at all times, even with the SmartKey removed from the starter switch. The hazard warning flasher comes on automatically when an air bag deploys. The hazard warning flasher switch is located on the upper part of the center console. Press the combination switch only to the point of resistance in direction of arrow ; or ? and release. The corresponding turn signal lamps will flash three times.