2000 Nissan Quest Owner's Manual - Page 138

Memory Driver Seat and Mirror Buttons The memory seat and mirror buttons are located on the driver door. Pressing the memory driver seat and mirror position 1 or position 2 button will recall the memory settings for both outside mirrors and driver seat for that memory seat position, provided the vehicle is in P (Park) or N (Neutral). For easy vehicle exit, press memory driver seat and mirror position 1 and position 2 buttons together to move the driver seat fully rearward and fully downward. This function is preset and cannot be changed. ● After the position has been programmed the indicator light will flash to indicate the position is set. The driver seat and/or outside mirrors must be adjusted before programming position 1 or position 2. Programming a multi-remote controller 1. Move the driver seat and outside mirrors by pressing the desired position 1 or position 2 button. 2. Press and hold the same (position 1 or position 2) button. 3. Within 10 seconds press the the multi-remote controller. button on APD1063 Multi-remote controller system entry Pressing the button on the multiremote controller unlocks the driver's door, and recalls the memory settings for both outside mirrors and driver's seat for that memory position. Two multi-remote controllers are delivered with the vehicle. They can be programmed with the same memory driver's seat and mirror positions, or each one can be programmed separately. One multi-remote controller can be programmed for memory driver's seat and mirror position 1, and the other for memory driver's seat and mirror position 2. Programming Memory Positions 1. Move the driver seat and outside mirrors to the desired position using the manual controls. 2. Push and hold the memory seat and mirror position 1 or position 2 button for at least 3 seconds. ● The indicator light will illuminate and remain illuminated until the position is programmed. The controller is now programmed for that (position 1 or position 2) button. After the multi-remote controller has been programmed, the memory seat and mirror button indicator light will flash to indicate the controller is programmed. If the memory seat button is pressed and held the indicator light will remain illuminated for as long as the button is held or 10 seconds which ever is shorter. Pre-driving checks and adjustments 3-13