2000 Nissan Quest Owner's Manual - Page 231
2000 Nissan Quest Manual
Page 231 highlights
8. Position the cowl cover in place. 9. Reinstall the four screw anchors and the four screws. 10. Close the hood. 11. Install the six screws in the cowl cover. 12. Install the windshield wiper arms. ● Push the wiper arm downward onto the wiper arm pivot until the small retaining clip snaps into the locked position. ADI1108 ADI1109 ● Lower the wiper arm blade onto the windshield surface. ● Remove the cabin air filter element by pulling forward on the top surface of the filter and lifting. 4. Install the new cabin air filter element into the filter retaining frame, ensure that you insert the three retaining tabs in the bottom of the filter frame. 5. Install the filter top cover and the four screws. 6. Feed the windshield washer hose from the cowl cover through the hole in the sheet metal. ● Ensure that you fully seat the rubber grommet into the sheet metal hole. 7. Reconnect the windshield washer hose. 8-16 Do-it-yourself