2000 Nissan Quest Owner's Manual - Page 55
2000 Nissan Quest Manual
Page 55 highlights
When the two-passenger bench seat is removed from the vehicle, you must detach the single window tongue from the auxiliary buckle. When the three-passenger bench seat is moved up to the second row position, the passenger seated near the passenger side sliding door needs to use the double window tongue and the standard buckle only. Because the three-passenger bench seat is wider and closer to the passenger side sliding door, the single window seat belt tongue and the auxiliary buckle are not necessary. CAUTION Third row passengers must be very careful when exiting because of the auxiliary seat belt. It is important to step over the seat belt guide and belt webbing to avoid tripping. Checking seat belt operation (Three-point type seat belt with retractor) Seat belt retractors are designed to lock seat belt movement: 1) when the seat belt is pulled quickly from the retractor, and 2) when the vehicle slows down rapidly. To increase your confidence in the seat belts, check their operation as follows. ARS1125 ● Grasp the shoulder belt and pull quickly forward. The retractor should lock and restrict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt operation, see an authorized NISSAN dealer. Unfastening the seat belts To unfasten the seat belt, press the button on the buckle. The seat belt automatically retracts. 1-48 Seats, restraints and supplemental air bag systems