2000 Nissan Quest Owner's Manual - Page 20
2000 Nissan Quest Manual
Page 20 highlights
● Do not sit in seats that have been removed from the vehicle. They may tip over and you could be injured. 1. Detach the single window seat belt tongue from the auxiliary buckle mounted to the side of the seat and store the tongue out of the way. For detailed information, see ''Two buckle seat belt system for the second row bench seat'' later in this section. 2. Lift up the recliner lever. 3. Fold the seatback fully forward. 4. Unlock the seat legs at the two rear floor latch levers by pulling up on the two straps. 5. Lift the back of the seat. 6. Slide the seat rearward off the front anchor positions. ARS1140 Installing the second row bench seat Clean the area around the seat leg floor anchors before installing the seat. 1. With the seatback fully folded, place the seat behind the floor anchors and catch the seat leg hooks into each floor anchor. 2. Push down on the back of the seat to secure the two rear floor latches. 3. Lift up the recliner lever and raise the seatback. 4. Rock the seat back and forth to be sure all four seat legs are securely latched. 5. Insert the single window seat belt tongue into the auxiliary buckle mounted to the side of the seat. Seats, restraints and supplemental air bag systems 1-13