2010 Nissan Altima Owner's Manual - Page 415
2010 Nissan Altima Manual
Page 415 highlights
INSTALLING FRONT LICENSE PLATE Use the following steps to mount the front license plate: 1 Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.39 in (10 mm) drill. To avoid damaging the threads behind the finisher, apply only light pressure to the drill. Mount the license plate bracket using two 10 mm slotted Phillip head screws. 2 WTI0178 AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. WTI0179 9-12 Technical and consumer information
AIRCONDITIONERSPECIFICATION
LABEL
Theairconditionerspecificationlabelisaffixedto
theundersideofthehoodasshown.
Usethefollowingstepstomountthefrontlicense
plate:
°
1
Make a shallow hole in each plastic finisher
at the location mark (small dimple) using a
0.39in(10mm)drill.Toavoiddamagingthe
threads behind the finisher, apply only light
pressuretothedrill.
°
2
Mountthelicenseplatebracketusingtwo
10
mmslottedPhillipheadscrews.
WTI0178
WTI0179
INSTALLINGFRONTLICENSEPLATE
9-12
Technicalandconsumerinformation