1998 Oldsmobile Silhouette Owner's Manual - Page 26

9. Attach the mini-buckle so that the safety belt is ready for use when a passenger uses the seat. A seat that isn't lockedinto place properlycan move around in a collision sudden stop. People or in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 7. Lift the seatback recliner lever or the nylon strap pull on the back of the seat and raise the seatback until it locks upright. The buckle reattaches by pushing the latch into the buckle until the red center pops out again. Repeat Steps 1 through 5 for the other section of the split bench seat. h CAU d O N : A safety beltthat is twistedor not properly attached won't provide the protection needed in a crash. The person wearingthe belt could be seriously injured. After installing the seat, always check to be sure thatthe safety belts not are twisted and are properly attached. 8. Push and pull on the seatback to check that it is locked. 1 ~ If the seatback isn't locked, could move it forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback tobe sure it is locked. 1-14