1995 Pontiac Sunfire Owner's Manual - Page 87

I'o Resume a Set Speed If you hold the switch at R/A longer than half a second, the vehicle will keep going faster until you release the switch or apply the brake or clutch pedal. You could be startled and even lose control. So unless you want to go faster, don't hold the switch at WA. To Increase Speed While Using Cruise Control There are twoways to go toa higher speed. Here's the first: 1. Use the accelerator pedal to get to the higher speed. 2. Push the button at the end of the lever, then release the button and the accelerator pedal. You'll now cruise at the higher speed. Here's the second way to go to a higher speed: Suppose you set your cruise control a desired speed at and then you apply the brake or clutch pedal. This, of course, shuts off the cruise control. Butyou don't need m) to reset it. Once you're going about 25 mph (40 k h or more, you can move the cruise control switch from ON to R/A for about half a second. You'll go right back up to your chosenspeed and stay there. Move the cruise switch from ON to R/A . Hold it there until you get up to the speed you want, and then release the switch. To increase your speed in very small amounts, move the switch to R/A for less than half a second and then release it. Each time you do this, your vehicle will go about 1 mph (1.6 kmk) faster.