2009 Volvo XC90 Owner's Manual - Page 209

09 Maintenance and servicing Engine oil NOTE Volvo uses different systems to indicate a low oil level or pressure. Some models have an oil pressure sensor, in which case a warning symbol (see page 56) is used to indicate low oil pressure. Other models have an oil level sensor, in which case the driver is alerted by the warning symbol in the center of the instrument panel and a text in the information display. Some models use both systems. Contact a trained and qualified Volvo service technician for more information. 09 Checking and adding oil Checking the oil • Pull out the dipstick and wipe it with a lintfree rag. • Reinsert the dipstick, pull it out, and check the oil level. • Add oil if necessary. If the level is close to the MIN mark, add approximately 1 US quart (1 liter) of oil. • Run the engine until it reaches normal operating temperature. • Switch off the engine and wait for at least G030880 Changing engine oil and oil filter See page 208 for oil specifications and page 268 for oil volumes. Refer to the Warranty and Service Records Information booklet for information on the oil change intervals. Location of dipstick (1) and oil filler cap (2) 10-15 minutes and recheck the oil level. If necessary, add oil until the level is near the mark. • Oil level should be between the MIN and MAX marks on the dipstick. NOTE Volvo does not recommend the use of oil additives. Synthetic oil is not used when the oil is changed at the normal maintenance intervals except at owner request and at additional charge. Please consult a trained and qualified Volvo service technician. The oil level should be checked every time the vehicle is refueled. This is especially important during the period up to the first scheduled maintenance service. • The vehicle should be parked on a level surface when the oil is checked. • If the engine is warm, wait for at least 10-15 minutes after the engine has been switched off before checking the oil. 209