2009 Volvo XC90 Owner's Manual - Page 218

2009 Volvo XC90 Manual

Page 218 highlights

09 Maintenance and servicing 09 Replacing bulbs Location of the bulbs in the headlight housing Replacing the low beam bulb (Halogen headlights) 7. Press the bulb holder into place on the headlight housing. 8. Reinstall the plastic cap. The letters "HAUT" on the cap must be upward. Replacing the high beam bulb (Halogen headlights) G027082 Low beam headlight/Active Bi-Xenon headlight (option) High beam headlight Turn signal Parking light Side marker light 1. Remove the plastic cover over the bulb (1) by turning it counterclockwise. 2. Pull the connector from the lamp housing (2). 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way. 4. Pull out the bulb from the holder. 5. Insert the new bulb (without touching the glass) in the holder. 6. Move the retaining spring up and push it slightly to the left until it seats properly. G027085 G027088 1. Remove the rubber cover (1) by pulling it off. 2. Pull the connector from the lamp housing (2). 3. Loosen the bulb's retaining spring by first moving it to the right and then moving it out of the way. 218

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282

09 Maintenance and servicing
Replacing bulbs
09
218
Location of the bulbs in the headlight
housing
G027082
Low beam headlight/Active Bi-Xenon
headlight (option)
High beam headlight
Turn signal
Parking light
Side marker light
Replacing the low beam bulb (Halogen
headlights)
G027088
1.
Remove the plastic cover over the bulb (1)
by turning it counterclockwise.
2.
Pull the connector from the lamp housing
(2).
3.
Loosen the bulb's retaining spring by first
moving it to the right and then moving it out
of the way.
4.
Pull out the bulb from the holder.
5.
Insert the new bulb (without touching the
glass) in the holder.
6.
Move the retaining spring up and push it
slightly to the left until it seats properly.
7.
Press the bulb holder into place on the
headlight housing.
8.
Reinstall the plastic cap. The letters
"
HAUT
" on the cap must be upward.
Replacing the high beam bulb (Halogen
headlights)
G027085
1.
Remove the rubber cover (1) by pulling it
off.
2.
Pull the connector from the lamp housing
(2).
3.
Loosen the bulb's retaining spring by first
moving it to the right and then moving it out
of the way.