3Com 3CRWPS10075-US User Guide - Page 22
Using the Windows Wizard, Procedure - setup
UPC - 662705484235
View all 3Com 3CRWPS10075-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
22 CHAPTER 3: WIRELESS PRINT SERVER CONFIGURATION Using the Windows The Windows-based Wizard is supplied on the CD-ROM, and runs on Wizard Windows 95, 98, NT4.0, ME, Windows 2000 and Windows XP. Using this Wizard is the recommended method to configure the Print Server. It can be used configure the Print Server for your Network environment, even if the Print Server does not have a valid IP address. Procedure 1 Insert the supplied CD-ROM into your drive. If the setup program does not start automatically, run Autorun.exe in the root folder. 2 On the first screen, shown below, click Setup Wizard. Figure 2 Print Server Screen 3 Click Next on the first screen of the Wizard, to view a list of Print Servers on your LAN. 4 Select your new Print Server, then click Next to continue. 5 Enter the required data on the following screen. ■ Name of the Print Server can be changed if you wish. ■ Select or enter the Workgroup name for this Print Server.