3Com 3CRWPS10075-US User Guide - Page 54
IPP Client Setup - Windows 2000/XP, Port Settings, Start - Settings - Printers, Properties, Details
UPC - 662705484235
View all 3Com 3CRWPS10075-US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
54 CHAPTER 6: SPECIAL FEATURES Changing the IPP Port Settings After the IPP port is created, you can reach the screen shown in Figure 27 using the Windows Port Settings button: 1 Open the Printers folder (Start - Settings - Printers) 2 Right-click the IPP Printer, and select Properties. 3 Locate and click the Port Settings button (Details or Port tab, depending on your version of Windows). There are two settings - Retry Interval and Retry Count - which can be adjusted if you have problems connecting to the IPP Server. ■ Retry Interval sets the time interval (in seconds) between connection attempts. Increase this number if you have a poor connection, or the remote server is very busy. ■ Retry Count sets how many connection attempts will be made. Increase this number if you have a poor connection, or the remote server is very busy. IPP Client Setup Windows 2000/XP Windows 2000 and XP have their own IPP Client, and there is no need to install the supplied IPP Client Software. To use the Windows IPP Client with the Print Server, follow this procedure: 1 Start the Add Printer wizard. 2 Select Network Printer, and click Next to see the Locate your Printer screen, as shown below.