3M X55I Operation Guide - Page 25
EASY Menu
View all 3M X55I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
3M™ Digital Projector S55i/X55i Multifunctional settings EASY Menu With the EASY MENU, items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table. EASY MENU ASPECT 4:3 KEYSTONE +0 MODE BRIGHTNESS CONTRAST COLOR TINT SHARPNESS NORMAL +0 +0 +0 +0 3 WHISPER NORMAL MIRROR NORMAL RESET FILTER TIME 0h LANGUAGE ENGLISH Go To Advance Menu... Item ASPECT KEYSTONE Description Using the buttons ◄/► switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (30). Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (21) Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA and a mode of COLOR TEMP. Choose a suitable mode according to the projected source. NORMAL CINEMA DYNAMIC MODE BRIGHTNESS CONTRAST COLOR TINT SHRPNESS WHISPER NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT) CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT) DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT) • When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is "CUSTOM". Please refer to the GAMMA (27) and COLOR TEMP (28) items in the PICTURE menu. • When this function is performed, a certain extra such as a line may appear. Using the buttons ◄/► adjusts the brightness. See the item BRIGHTNESS in the PICTURE menu (27). Using the buttons ◄/► adjusts the contrast. See the item CONTRAST of section PICTURE menu (27). Using the buttons ◄/► adjusts the strength of whole color. See the COLOR item in the PICTURE menu (28). Using the buttons ◄/► adjusts the tint. See the TINT item in the PICTURE menu (28). Using the buttons ◄/► adjusts the sharpness. See the SHARPNESS item in the PICTURE menu (28). • There may be some noise when an adjustment is made. This is not a malfunction. Using the buttons ◄/► turns off/on the whisper mode. See the WHISPER item in the SETUP menu (34). © 3M 2005. All Rights Reserved. 25