3M X55I Operation Guide - Page 32

3M™ Digital Projector S55i/X55i Multifunctional settings INPUT Menu With the INPUT menu, the items shown in the table below MENU [RGB] :SELECT can be performed. PICTURE IMAGE COLOR SPACE AUTO COMPONENT COMPONENT Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► INPUT SETUP SCREEN OPTION VIDEO FORMAT AUTO FRAME LOCK TURN ON INFORMATION on the projector or remote control, or the ENTER button EASY MENU on the remote control to execute the item. Then perform it referring to the following table. Item Description Using the buttons ▲/▼ switches the mode for color space. AUTO  RGB  SMPTE240  REC709  REC601 COLOR SPACE COMPONENT VIDEO FORMAT FRAME LOCK • This item can be selected only for an RGB signal or a component video signal (except signals of 525i(480i)/625i(576i)/SCART RGB from the component video port). • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO. Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. COMPONENT  SCART RGB When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer. Using the buttons ▲/▼ switches the mode for video format. AUTO  NTSC  PAL  SECAM N-PAL  M-PAL  NTSC4.43 • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identified automatically independently of this function. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal. Using the buttons ▲/▼ turns the frame lock function on/off. TURN ON  TURN OFF • This item performs only at a RGB signal with vertical frequency of 50 to 72 Hz for the model S55i, or 50 to 60 Hz for the model X55i. • When the TURN ON is selected, a moving picture is displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. 32 © 3M 2005. All Rights Reserved.