3M X55I Operation Guide - Page 34

3M™ Digital Projector S55i/X55i Multifunctional settings SETUP Menu With the SETUP menu, the items shown in the table below can be performed. Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table. MENU [RGB] :SELECT PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU KEYSTONE +0 WHISPER NORMAL MIRROR NORMAL VOLUME 16 AUDIO Item KEYSTONE WHISPER MIRROR VOLUME AUDIO Description Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data  Lower in the data • The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well. • When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. • When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible. Using the buttons ▲/▼ turns off/on the whisper mode. NORMAL  WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the buttons ▲/▼ switches the mode for mirror status. NORMAL  H:INVERT  V:INVERT  H&V:INVERT Using the buttons ▲/▼ adjusts the volume. High  Low Choose an input port using the buttons ▲/▼ AUDIO (1), then select the audio port to be interlocked QUIT with the input port using the buttons ◄/► (2). RGB1 1 2 When off is selected, both of two audio ports do not work for the input port. RGB2 COMPONENT S‑VIDEO VIDEO (1) RGB1  RGB2  COMPONENT  S-VIDEO  VIDEO (2) 1  2  34 © 3M 2005. All Rights Reserved.