3Ware 9550SXU-8LP User Guide - Page 7

About This Guide 3ware Serial ATA RAID Controller User Guide provides instructions for configuring and maintaining your 3ware 9000 series controller. This guide assumes that you have already installed your controller in your system. If you have not yet done so, see the installation guide that came with your controller. You can download the installation guide from You can download that guide from: http://www.3ware.com/support/userdocs.asp. (Note that there are different installation guides for the 9590SE, the 9550SX, and the 9500S.) How this Guide is Organized There are often multiple ways to accomplish the same configuration and maintenance tasks for your 3ware RAID controller. This manual includes instructions for performing tasks using two tools: one at the BIOS level (3ware BIOS Manager 2, or 3BM 2) and one that runs in a browser (3ware Disk Manager 2, or 3DM 2). You can also perform many tasks at the command line, using 3ware's Command Line Interface (CLI). The CLI is described in a separate manual, available from the 3ware software CD and from 3ware's website: 3ware 9000 Series Serial ATA RAID Controller CLI Guide. Basic information about using the two tools (3BM 2 and 3DM 2), such as starting the tool, navigating between screens, and so forth, is described in sections about each of those tools: "3ware BIOS Manager 2 (3BM 2)" on page 55 and "3ware Disk Manager (3DM 2)" on page 65. Step-by-step instructions for performing specific tasks are organized by tasks throughout other sections of this guide. For example, the instructions for "Configuring a New Unit" on page 128 include information about how to create a unit from 3DM, followed by how to create a unit from 3BM. www.3ware.com v