AIWA CX-NMT50 Operating Instructions - Page 13
Continuous - how do i tape music use cassette
View all AIWA CX-NMT50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
MUSIIC SENSOR If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily. Press the + or > button during playback referring to the playback side indicator (4 or b) on the display. For example, when the - button is pressed while E is displayed, playback of the next track starts. Music sensor function may not be able to detect tracks under the following conditions: c Blanks of less than 4 seconds between tracks q Noisy blanks q Long passages of low-end sound q Low c,verall recording levels CONTINUOUS PLAY . About cassette tapes q To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool. Side A ~o (q \ Q@ _ ;a \ Type II tape detection slot * L Tab for side A J To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.) q 120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. q Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism, "1 - u After playback on one deck finishes, the tape in the other deck will start to play without interruption, 1 Insert tapes into deck 1 and deck 2. 2 Press the TAPE/DECKl/2 button to select the deck to be played back first. 3 Press the REV MODE button to select 11. 4 Press the +> button to start playback. Playback continues until the s button is pressed. EAfGL/SH I :?