AIWA CX-NMT50 Operating Instructions - Page 17
Programmed, Edit Recording
View all AIWA CX-NMT50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
PROGRAMMED EDIT RECORDING 5 Remaining time of side A Total number of programmed tracks Programmed tracks 7 Press the CD EDIT/CHECK button to select side B and program the tracks for side B. After confirming B on the display, repeat step 5. Tape side B (reverse side) 1 Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed. The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either :side. 1 insert the tape into deck 2. Insert the tape with the side to be recorded on first facing out from the unit. 2 Press the CD button and load the disc(s). 3 Prx>ss the CD EDIT/CHECK button twice. '{EDIT" and "PRGM" light up on the display, 8 Press the @ REC/REC MUTE button to start recording. The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts. To stop recording Press the s button. Recording and CD play stop simultaneously. To check the order of the programmed track numbers When "Al" is displayed, press the CD EDIT/CHECK button again. 4 Press the 4 or - button to designate the tape length. 10 to 99 minutes can be specified. Tape length Maximum recording time for side A Tape side A (front side) 5 Press the DISC DIRECT PLAY button, then press one of the numbered buttons 1 to 3 within 3 seconds on the remote control. Then, press the numbered buttons and the + 10 button on the remote control to program a track. Example: To select the 10th track of disc 2, press the DISC DIFIECT PLAY and 2 buttons, then press the + 10 and O buttons. 6 Repeat step 5 for the rest of the tracks for side A. A track whose playing time is longer than the remaining time carmot be programmed. Track number Programmed track numbers To change the program of each side Press the CD EDIT/CHECK button to select side A or B, and press the s CLEAR button to clear the program of the selected side. Then program tracks again. To clear the edit program Press the s button twice so that "EDIT" disappears on the display, m Recording is inhibited if the erasure prevention tab on either side of the tape is broken off. ENGLISH 16