Aastra 6737i 6737i User Guide - Page 53
Key Display Behavior, Label, Value
View all Aastra 6737i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Line Keys and Softkeys Softkey Type Speeddial/Xfer Speeddial/Conf Directory Callers List Redial Conference Transfer Intercom Services Phone Lock Paging Empty Default States Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy Idle, Connected, Incoming, Outgoing, Busy All states disabled. All states disabled. Idle, Connected, Incoming, Outgoing, Busy In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for that state. Key Display Behavior On the 6737i IP Phone, you can configure up to 20 functions on the bottom softkeys. If you have no softkeys configured on the IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automatically appear in the first available position on the LCD display. For example, if the bottom softkeys 1 through 20 are set to "None", and you set softkey 12 as the following: Type: speeddial Label: LAB Value: 3456 after saving the settings, the "LAB" label actually appears in position 1 of the LCD. A softkey function of "None" does not display on the idle screen at all. 41-001452-05 REV01 - 04.2014 47