Acer DV433 User Manual - Page 28
Connecting with an analog video source, Analog connection
![]() |
View all Acer DV433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 Chapter 2 Preparation for use Connecting with an analog video source Analog connection: 1 Connect a signal cable (VGA or YPbPr cable), to the VGA or AV IN connector. 2 Select AV, Component, or VGA using the SOURCE button on the LCD display, or the SOURCE button on the infrared remote control. Once selected, the audio automatically switches to [LINE IN]. Audio connection: • Connect an audio cable (ø3.5-mm stereo mini) (commercially available), to the LINE IN connector. Because the audio automatically switches to [LINE IN], the audio is output simply by connecting the cable. The display automatically distinguishes the timings shown in the table below, and sets the screen information. When a PC or other device is connected, it automatically displays images properly. See ""Connecting with a digital video source"" on page 29.
![](/manual_guide/products/acer-computers-dv433-user-manual-4cedc13/28.png)