Acer DV433 User Manual - Page 68
Controlling Multiple Displays, Power ON Delay
View all Acer DV433 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
68 Chapter 3 How to use the LCD Display Monitor Power ON Delay Multi Display Control Menu Screen For installations using multiple displays, the power-on delay function can power up the displays sequentially with a delay of 0-30 seconds after the power is applied. Using this function can prevent inrush current problems, and reduce the overall electrical load requirements when a single power supply is used. • Set the power on delay or turn it off. • 0-30 seconds/0.5 second steps. • Set to "AUTO" by default. • This function is interlocked with the number of the display ID. • When multiple displays are used, each display is assigned an individual display ID. • For "Power On Delay", when "AUTO" is chosen, each display's power supply delay time is defined as follows. • Delay time = number of display ID × 0.3 seconds. • For example, for a display in which display ID is set to 5, the power supply is turned on after 1.5 seconds. Controlling Multiple Displays Use these instructions to set a display's ID number with the infrared remote control. 1 Press [MENU]. 2 Use the DOWN button (▼), to move to the option "Multi Display Control", and press [OK]. 3 Use the LEFT (), and RIGHT (), buttons to select the display's two digit ID. 4 Exit the menu by pressing the [MENU] button. Use these instructions to select a display to control with the infrared remote control. Display IDs have two digits. In this example the selected display's ID is "02". 1 Press [SET ID]. The OSD will display "IR Set ID". 2 Press "0". The OSD will display "IR Set ID 0". 3 Press "2". The OSD will display "IR Set ID 02". 4 Press [ENTER]. If the display's ID is "02", the OSD will display "IR Free 02". 5 If the display's ID is not "02", the OSD will display "IR Lock 02". 6 To clear the lock status, press [SET ID]. Use the [INFO] button to identify the current display's ID. The OSD will display the ID. To reset all display IDs in the daisy chain, press [SET ID], "0", "0", then [ENTER].