Acer DV433 User Manual - Page 29

Connecting with a digital video source Chapter 2 Preparation for use 29 Digital connection: • Connection via the HDMI IN connector (1) Connect an HDMI cable (commercially available) to the HDMI1 IN or HDMI2 IN connector. (2) Select [HDMI1] or [HDMI2] according to the connected connector by pressing the SOURCE button on the LCD display or the HDMI1 or HDMI2 button on the infrared remote control. • Connection via the DVI-D IN connector (1) Connect a DVI-D cable (commercially available) to the DVI-D IN connector. (2) Select [DVI-D] using the SOURCE button on the LCD display or the DVI-D button on the infrared remote control. Second display connection: • Connect the DVI-D OUT connector on the first display and the DVI-D IN connector on the second display using a DVI-D cable (commercially available). NOTE • The daisy chain connection allows up to 9 LCD displays to be connected (when using 2-meter cables. However, the maximum number of connectable LCD displays may be limited. It is recommended to check the number of connectable LCD displays in your installation environment in advance. • Set the power off time using the POWER SAVE selection in the SETUP menu. • Tiling mode can be used in HDMI1/2 for multi displays, if there is an external HDMI split- ter equipped. Audio connection: • For HDMI 1/2/DVI-D, the default setting of audio source is a TMDS signal with HDMI/ DVI cable. Users can use an external audio source if an audio cable (ø3.5-mm stereo mini) (commercially available) is connected to the LINE IN connector. LINE IN" should be selected for the audio input source. • To output the audio to the second display, connect the LINE OUT connector on the first display and LINE IN connector on the second display using an audio cable (ø3.5-mm stereo mini) (commercially available).