Acer Veriton 3200 Veriton 3200 User Guide - Page 93
the screen to save power., Press any key to turn the display back on.
View all Acer Veriton 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
83 The following questions are possible situations that may arise during the use of your computer and each is followed by easy answers and solutions to the situation. Q: I pressed on the power switch but the system did not boot up. A: Check the LED located at the center of the power switch. If the LED is not lit, no power is being applied to the system. Do any of the following: • Check if you plugged the power cable properly into an electrical outlet. • If you are using a power strip or AVR, make sure that it is plugged in and turned on. If the LED is lit, check the following: • Is a nonbootable (nonsystem) diskette in the floppy drive? If yes, remove or replace it with a system diskette and press Ctrl + Alt + Del to restart your computer. • The operating system files may be damaged or missing. Insert the startup disk you created during Windows setup into the floppy disk drive and press Ctrl + Alt + Del to restart your computer. This will automatically diagnose your system and make necessary fixes. Q: Nothing appears on the screen. A: Your computer's power management function automatically blanks the screen to save power. Press any key to turn the display back on. If pressing a key does not work, you can restart your computer. If restarting your computer does not work, contact your dealer or the technical support center for support. Q: The printer does not work. A: Do the following: • Make sure that the printer is connected to a power outlet and that it is turned on. • Make sure that the printer cable is connected securely to the system's parallel port and the corresponding port on the printer. See "Printer" on page 37 for information on how to connect the printer to your computer.