Adaptec 5325301507 Administration Guide - Page 100
Configuring the QLogic QLA4010 and QLA4050/52c iSCSI Initiators for Microsoft Windows
UPC - 753253015740
View all Adaptec 5325301507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Configuring iSCSI Initiators 6 Identify the specific volume you are expanding. 7 Enter: select disk n where n is the disk number that Diskpart indicated from the list command. 8 Enter: select Volume n where n is the volume number that Diskpart indicated from the list command. 9 Enter extend size=n where n is the number of megabytes you want to expand the disk. For example, if you are adding 10 GBs to an existing disk of 100 GBs, use the following command: extend size=10240 (the number is in megabytes, 1024MBs = 1GB) Note The Disk Management GUI will show the newly expanded disk size. 10 Exit the Computer Management tool. 11 Restart the necessary application services. Configuring the QLogic QLA4010 and QLA4050/52c iSCSI Initiators for Microsoft Windows QLogic's QLA4010 and QLA4050/52c are iSCSI adapters that appear as a SCSI adapter instead of a network adapter in Windows Device Manager. Before the QLA4010 or QLA4050/52c can successfully connect to iSCSI targets, you must: • Set initiator parameters (for example, initiator name, alias, IP address). • Enter target information (for example, target portal information and target iSCSI name). You can use either the SANSurfer Management application that came with the QLA4010/4050/4052c or Microsoft's iSCSI initiator applet to set initiator parameters and enter target information. Follow the instructions in the documentation to install and configure the adapter. 84 SnapServer Administrator Guide