Adaptec 5325301507 Administration Guide - Page 87
in the chassis., With the left-side latch pressed
UPC - 753253015740
View all Adaptec 5325301507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Disks and Units 3 Press the latch on the right side of the disk drive to release the front lever. Grasp the lever and pull to remove the drive from the chassis. 4 With the drive carrier lever open, slide the new drive into the chassis. 5 Once the drive is pushed all the way into the chassis, close the drive carrier lever and press until it locks into place. 6 Replace the bezel by sliding the pegs on the right side of the bezel into the holes in the chassis. 7 With the left-side latch pressed in, fit the left side of the bezel onto the front of the chassis. When the bezel is positioned correctly, release the latch to lock the bezel in place. Chapter 4 Storage Configuration and Expansion 71
Disks and Units
Chapter 4
Storage Configuration and Expansion
71
3
Press the latch on the right side of the disk drive to release the front lever. Grasp
the lever and pull to remove the drive from the chassis.
4
With the drive carrier lever open, slide the new drive into the chassis.
5
Once the drive is pushed all the way into the chassis, close the drive carrier lever
and press until it locks into place.
6
Replace the bezel by sliding the pegs on the right side of the bezel into the holes
in the chassis.
7
With the left-side latch pressed in, fit the left side of the bezel onto the front of the
chassis. When the bezel is positioned correctly, release the latch to lock the bezel
in place.