Adaptec 5325301507 Administration Guide - Page 207
SnapServer 4200/4500 Status and Drive Light Behavior, Power, System, and LAN LEDs, Power LED
![]() |
UPC - 753253015740
View all Adaptec 5325301507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
The Meaning of LED Indicators SnapServer 4200/4500 Status and Drive Light Behavior The server has two status lights, two network lights, and two lights for each of the four disk drives, as shown in the following illustration: Power LED System LED LAN LEDs Disk Drive LEDs Overland Storage recommends that you become familiar with the operation of these lights. Power, System, and LAN LEDs These status lights are located to the right of the power button. Looking at the server from the front, the lights appear in the following order, from left to right: power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The LEDs operate as described in the following tables: Power LED Solid green Off The server is powered on. The server is powered off. System LED Double-blink green Triple-blink green Solid or blinking amber at boot time The server is booting up. The server is shutting down. A problem was detected. The server will not boot. Appendix C Troubleshooting SnapServers 191
![](/manual_guide/products/adaptec-5325301507-administration-guide-0f96d41/207.png)