Adaptec 5325301638 Administration Guide - Page 101
Snap Server18000 Status & Drive Light Behavior, Power, System, and LAN LEDs, Power LED, System LED
![]() |
UPC - 753253016389
View all Adaptec 5325301638 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
The Meaning of LED Indicators Snap Server18000 Status & Drive Light Behavior The server has two status lights, two network lights, and two lights for each of the eight disk drives, as shown in the following illustration: Power LED System LED 1 2 3 4 5 6 7 8 LAN LEDs Disk Drive LEDs Power, System, and LAN LEDs Looking at the server from the front, the lights appear in the following order, from left to right: power LED, system LED, LAN 1 (Ethernet1) LED, and LAN 2 (Ethernet2) LED. The LEDs operate as described in the following tables: Power LED Solid green Off The server is powered on. The server is powered off. System LED Double-blink green The server is booting up. Triple-blink green The server is shutting down. Solid or blinking amber at boot time A problem was detected by BIOS. The server will not boot. Blinking amber during A thermal or other system problem was detected normal operation LAN 1 and LAN 2 LEDs Solid green Off The server is active and connected to the network. The port is disconnected; or the Ethernet cable is not connected or linked to an active switch. Chapter 10 Troubleshooting Snap Servers 87
![](/manual_guide/products/adaptec-5325301638-administration-guide-98fc25b/101.png)