Alesis Strike Pro Special Edition Strike Pro Special Edition - Module User Gui - Page 28

Setting Subdvsn Description This determines the subdivision of each beat. Values/Settings Off, 1/4, 1/8, 1/16, 1/32, 1/64. Trplt indicates a triplet-based time division. Subd Lvl This is the volume level of subdivisions of each bar. 00-99 Subd Snd This is the sound used for subdivisions of each bar. Woodblock 1, Woodblock 2, Cowbell 1, Cowbell 2, Shaker Tap Tempo This determines whether the Metro > Tempo button is On, Off enabled or disabled. Output This determines where the metronome sound is routed: Main Out the Main Out, headphone jack (Hdph Out), or both (Main & Hdph). Hdph Out Main & Hdph MIDI Setting Description Values/Settings Drum Chan This is the MIDI channel over which the module will receive MIDI data. Omni (all channels) 01-16 MIDI Thru This determines whether or not the module's MIDI Out functions as a MIDI Thru. Enabled: A MIDI device connected to the module's MIDI In will send its MIDI messages through the module to the device connected to the MIDI Out. Disabled: Only MIDI messages originating from the module itself will be sent out of its MIDI Out. Note: You can send MIDI program change messages to your Strike module's MIDI input or USB port. The numbers of program change messages correspond to the kits listed in the current folder. Alternatively, send MIDI CC #118 to increment by one kit or MIDI CC #119 to decrement by one kit. 28