Alpine HCE-C200R Owners Manual - Page 12

Connections REVERSE OUT REVERSE IN GND IGNITION Fuse (7.5A) Cable Color Cable Specifications Orange/Black Reverse Output Lead This transmits to the monitor or navigation that ---- To monitor or navigation reverse the car's transmission is shifted into reverse. input Orange/White Reverse Input Lead Connect to the plus side of the car's reverse lamp that lights when the transmission is shifted into reverse (R). Switches the video picture to the back-up camera. This is linked with putting the car into reverse (R). ---- To plus side of the back lamp signal lead of the car Black Red Ground Lead Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made ---to bare metal and is securely fastened using the sheet metal screw provided. Connect to a metal part of chassis body with a screw Switched Power Lead (Ignition) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position. Ignition Key 12 3 4 5 1 V.OUT Terminal Connect this to the camera terminal of the monitor or navigation. 2 OTHER CAMERA Terminal Not used. 3 FRONT CAMERA Terminal Connect this to the front camera (HCE-C200F) 4 REAR CAMERA Terminal Connect this to the rear camera (HCE-C200R) 5 Switch Terminal Connect this to the switch (HCE-C200R included) 11-EN