Alpine HCE-C200R Owners Manual - Page 14

(2) Connecting an Alpine Head Unit and an Alpine Navigation System Reverse Lead (Orange/White) ---- To plus side of the back lamp signal lead of the car Navigation System (Sold Separately) Reverse Input Lead (Orange/White) Reverse Lead (Orange/White) Reverse Output Lead (Orange/Black) RGB cable (Included with Navigation) V.OUT Terminal Head Unit (Sold Separately) CAMERA Input Terminal RCA extension cable (2m) (HCE-C200R included) IVA-D310 series, IVA-W200 series, etc. TOPVIEW FRONT CAMERA (HCE-C200F) TOPVIEW REAR CAMERA (HCE-C200R) Switch (HCE-C200R included) FRONT CAMERA Terminal REAR CAMERA Terminal SWITCH Terminal Camera extension cable (4m) (HCE-C200F included) Camera extension cable (7m) (HCE-C200R included) • When you route and arrange cables around the engine or car interior, do so as to avoid hot parts. • The front view camera (HCE-C200F) and rear view camera (HCE-C200R) are designed to be connected separately. The front camera and rear camera can be identified by their bottom labels. • Connect the cameras by referring carefully to connection instructions or labels. • The "OTHER CAMERA" terminal is not used, do not connect this. • Connect the Reverse Output Lead (Orange/Black) of this unit to the Reverse Lead (Orange/White) of the Head Unit/Monitor. • Connect the Reverse Lead (Orange/White) of the Navigation System to the plus side of the back lamp signal lead of the car. • Connect the water-proof connector for the camera and camera extension cable securely. When disconnecting the water-proof connector, use a minus screwdriver. Water-proof connector 13-EN