Alpine HCE-C200R Owners Manual - Page 15
Confirmation
View all Alpine HCE-C200R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Confirmation 1 Securing leads, etc. Make sure leads are not pinched by moving parts such as the seat rail, etc. Also check for damaged from sharp edges or protrusion. Refer to "Securing the Camera Cable." (page 8, 9) 2 Connect the battery (−) terminal. 3 Turn on the engine key. Make sure the unit is operating correctly by referring to the Owner's Manual. 4 Adjust the camera angle. Refer to "Adjusting the Camera Angle." 5 Make sure all factory components such as the brake lamps, etc. work correctly. Adjusting the Camera Angle Angle adjustment screw Caution When adjusting the camera angle, do so after turning off the engine and applying the hand brake to avoid an accident. 1 Put the gear shift into reverse (R) or press ON/OFF, and check the image from the camera on the display. When you set the corner view, adjust the angle so that the road may be roughly viewed horizontally. 2 Loosen the camera mounting 3 and angle adjustment screw. Determine the camera angle, and carefully tighten the angle adjustment screw. 14-EN