Alpine HCE-C200R Owners Manual - Page 6
Rear Camera Operation - rear camera system
View all Alpine HCE-C200R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Rear Camera Operation Turning the Rear Camera On and Off 1 Shift the gear lever to the reverse position (reversing). The image display of the car rear and surround interruption depends on gear lever operation. 2 If you shift the gear lever to a position other than reverse (reversing), the monitor returns to the previous screen. • Refer also to the Owner's Manual of the connected monitor/navigation system. • Be sure to also check behind and around the car visually. Use the camera image to assist in showing conditions behind and around the car. • Depending on where the unit is installed, actual conditions may differ from the displayed image. • The ON/OFF switch is used to turn the front camera on/off. How the rear camera turns on/off depends on the position of the gear lever. Changing the Rear Image Configuration 1 Press MODE. The image configuration changes every time MODE is pressed. ↓ Panorama View ↓ Rear View ↓ Top View ↓ Corner View Rear View: Displays what is behind the car. Use this when reversing into a parking space, for example. Top View: Displays an image from above down to the lower section of the car. Use this when to determine the car's position in relation to the curb, etc. Corner View: Displays a divided image left and right of centre. Use this mainly when checking the left and right directional view. Panorama View: Displays a general perspective of what is behind the car. Use this when you want to check mainly behind the car. 5-EN