Alpine HCE-C200R Owners Manual - Page 7

Front Camera Operation Turning the Front Camera On and Off 1 Press ON/OFF. Pressing ON/OFF will display an image of what is ahead of the car, interrupting the display screen. 2 Pressing ON/OFF again will turn off image of the car ahead, and return to the previous screen to be interrupted. • Be sure to also check behind and around the car visually. Use the camera image to assist in showing conditions behind and around the car. • Depending on where the unit is installed, actual view may differ from displayed image. Changing the Front Image Configuration 1 Press MODE. The image configuration changes every time MODE is pressed. ↓ Panorama View ↓ Corner View ↓ Top View Panorama View: Displays a general perspective of what is ahead of the car. Use this when you want to check mainly ahead of the car. Corner View: Displays a divided image left and right of centre. Use this mainly when checking left and right directional view. Top View: Displays an image from above down to the lower section of the car. Use this when to determine the car's position in relation to the curb, etc. 6-EN