Alpine IVA W505 Owners Manual - Page 231
L.L.C. (Linear Luminance Control) Setup, L.L.C. Setting Operation - aux
UPC - 793276200617
View all Alpine IVA W505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
L.L.C. (Linear Luminance Control) Setup L.L.C. Setting Operation To display the L.L.C. mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the L.L.C. mode operation has been released. Engaging the parking brake can reactivate the L.L.C. mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the L.L.C. mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the L.L.C. mode screen." The following steps 1 to 4 are common operations to each "Setting item" of L.L.C. Setup. Refer to each section for details. 1 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. 2 Touch [L.L.C. SETUP]. The L.L.C. SETUP screen appears. 3 Touch [ ] or [ ] etc., of the desired item to change its setting. Setting items: L.L.C.* VISUAL EQ* CONTRAST SHARP* BRIGHT COLOR* USER MEMORY* TINT* * The setting is available in the visual source mode (except navigation screen). 4 Touch [ ] to return to the previous screen. Touch and hold [ ] for at least 2 seconds to return to the main source screen that was displayed before the setup operation was started. • Only one setting item can be displayed on each page, you can select the desired brightness, picture tint, etc through the screen displayed. Picture Quality Darkness Adjustment Function (L.L.C.) This function allows picture darkness (brighter black/deeper black) of a dark scene to be adjusted. Setting item: L.L.C. Setting contents: OFF / 1 / 2 / 3 / 4 / 5 You can adjust the level of picture adjustment effectiveness between 1 and 5. 1 2 3 4 5 Darker Brightness 40-EN Darkness Balance Brighter Selecting the VISUAL EQ Mode (Maker's setting) You can select a mode suitable for the subject image. Setting item: VISUAL EQ Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP / CONTRAST / P-1 / P-2 OFF (FLAT): Initial Setting NIGHT M.: Suitable for movies in which dark scenes frequently appear. SOFT: Suitable for CGs and animated films. SHARP: Suitable for old movies where images are not clearly shown. CONTRAST: Suitable for recent movies. P-1: Recalls the VISUAL EQ mode being stored on preset No.P-1 from "Storing VISUAL EQ" (page 41). P-2: Recalls the VISUAL EQ mode being saved on preset No.P-2 from "Storing VISUAL EQ" (page 41). • To return to the initial setting after selecting any one of the setting contents (NIGHT M. to CONTRAST) and adjusting a desired brightness, picture tint, etc., set this function to OFF. • If your desired brightness, picture tint, etc., are adjusted after selecting any one of the setting contents (NIGHT M. to CONTRAST), "CUSTOM" is displayed. Adjusting Brightness Setting item: BRIGHT Setting content: -15 ~ +15 You can adjust the brightness between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. • When any Visual EQ Preset is selected, the brightness is automatically adjusted according to the car's interior lighting as long as AUTO is set in "Setting the Brightness of the Backlighting" (page 35). Adjusting Color of Picture Setting item: COLOR Setting content: -15 ~ +15 You can adjust the color between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. • Color adjustment can be made only in the navigation, DVD, Video CD, AUX modes. • Color adjustment cannot be made if a Navigation system with the RGB feature is connected. Adjusting Tint of Picture Setting item: TINT Setting content: G15 ~ R15 Adjust the color from G15 to R15. "G MAX" or "R MAX" is displayed at the maximum of each color. • Tint adjustment can be made only in the navigation, DVD, Video CD, AUX modes. • Tint adjustment cannot be made if a Navigation system with the RGB feature is connected. • When setting PAL, you can not adjust the TINT.