Alpine IVA W505 Owners Manual - Page 241
Storing Settings in the Memory, Calling up the Preset Memory, IMPRINT Operation (Optional) - problems
UPC - 793276200617
View all Alpine IVA W505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Linear PCM Setting The output when playing discs recorded in linear PCM can be set to 2 or 3 channels. Setting item: PCM MODE Touch [ ] or [ ] of PCM MODE to select 2CH or 3CH. 2CH: 2ch output (L/R) 3CH: 3ch output (L/R/CENTER) • This adjustment is ineffective when the speaker is set CENTER to OFF in "Setting the Speakers" (page 48). Storing Settings in the Memory Adjustment or setting contents can be stored. Contents that can be stored vary depends on the audio processor used. 1 Touch [MEMORY] on the A.PROCESSOR list display. 2 Within 5 seconds, touch any one of the preset buttons [P.SET 1] through [P.SET 6] on the A.PROCESSOR list screen. The setting contents are stored. • The stored contents will not be deleted even when the battery power cord is detached. Calling up the Preset Memory Touch any one of the preset buttons [P.SET 1] through [P.SET 6] on the A.PROCESSOR list display to select the preset memory. • It takes a few moments to call up the preset memory. IMPRINT Operation (Optional) Alpine introduces IMPRINT - the world's first technology that thoroughly eliminates in-car acoustic problems that normally degrade sound quality, which enables us to experience music the way the artist intended, refer to "About IMPRINT" (page 56). When the IMPRINT audio processor (PXA-H100) (sold separately) is connected to this unit, MultEQ and the following sound adjustment can be performed. To display the IMPRINT mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the IMPRINT mode operation has been released. Engaging the parking brake can reactivate the IMPRINT mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the IMPRINT mode screen." Each time the ignition is turned OFF, perform the procedure of "To display the IMPRINT mode screen." Changing MultEQ mode MultEQ, developed by Audyssey Labs, automatically corrects the audio for the listening environment. The system is optimized for selected positions in the vehicle. To accomplish this, MultEQ must take measurements of the vehicles response characteristics. For details on the set up procedure, consult your authorized Alpine dealer. 1 Press IMPRINT button of the unit, the MultEQ mode selection screen will be displayed. 2 Touch [ ] or [ ] to change the setting. Setting contents: OFF / CURVE 1 / CURVE 2 OFF: Adjusting the audio settings manually to create your own preference. CURVE1/ CURVE2: Correcting the audio for the listening environment automatically. • The Curve mode can be selected only when curve 1 and curve 2 are stored. • When MultEQ is set to CURVE 1 or CURVE 2, MEDIA XPANDER, XOVER, T.CORR, SUBWOOFER PHASE, SUBWOOFER SYSTEM, SUBWOOFER CHANNEL, TW SETUP, P-EQ, G-EQ and F-EQ can not be adjusted. 50-EN