Alpine IVA W505 Owners Manual - Page 238
Phase Switching, Graphic Equalizer Adjustments, Select L+R or L/R by touching
UPC - 793276200617
View all Alpine IVA W505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
4 Touch [ ] or [ ] of T.CORR. Select L+R or L/R. L+R: L/R: Sets the same adjustment values for the left and right channels. Different adjustment values can be set for the left and right channels. 5 Touch [ ] of T.CORR. The T.CORR adjustment screen appears. 6 Adjust the time correction value (0.00 ~ 20.00ms) of a desired speaker by touching the respective [ ] or [ ] button (1 step = 0.05ms). • When the speaker is set to the "OFF" mode, the TCR for that speaker cannot be set. Refer to "Setting the Speakers" (page 48). • The adjustment value for FRONT2 (Speakers) which is adjusted in time correction, is also applied to the front speakers in "Setting Bass Focus" (page 45). • The adjustment (AUTO TCR) cannot be automatically set on this unit. Phase Switching Setting item: PHASE Switch the phase (0° or 180°) by touching [ ] or [ ] of the desired speaker. Graphic Equalizer Adjustments The graphic equalizer allows you to modify the sound using 31 bands each for the front (left and right), rear (left and right) and center speakers. An additional 10 bands are available for the subwoofer. This allows you to customize the sound to suit your taste. Setting item: G-EQ 1 Select L+R or L/R by touching [ ] or [ ] of G-EQ. L+R: L/R: Sets the same adjustment values for the left and right channels. Different adjustment values can be set for the left and right channels. When parametric EQ is adjusted, this setting will be turned off. 2 Touch [ ] of G-EQ. The G-EQ list screen appears. 3 Touch [ ] of the desired speaker (channel). The G-EQ adjustment screen appears. 4 Adjust the G-EQ to your preference. Adjusting the Level Touch [ ] or [ ] of the desired frequency to adjust the level. • When the speaker is set to the "OFF" mode, the graphic equalizer for that speaker cannot be set. Refer to "Setting the Speakers" (page 48). • Check the playable frequency ranges of the connected speakers before making the equalizer adjustments. If the speaker's playable frequency range is 55 Hz to 30 kHz, for example, adjusting the 40 Hz or 20 Hz band has no effect. Additionally, you may overload and damage the speakers. • When graphic EQ is adjusted, the adjustment for parametric EQ becomes ineffective. 47-EN