Asko W600 Service Manual - Page 6

INSTALLATION STACKED INSTALLATION ASKO dryers can be mounted on top of any matching ASKO washer. Mounts are supplied with the machine. Two metal brackets for securing the dryer to the washer Two plastic cups to secure the dryer legs. To install the dryer on top of the washer, follow the steps below: 1. Remove the two outside screws (20 torx) from the back of the washer and use them to secure the metal brackets, as illustrated. IMPORTANT Don't forget the lock washers. the tabs to position the cups (as illustrated) then press them firmly into place. 4. Once the cups are in place, break off the remaining plastic tabs on the outside edge and front of the cup. 5. Lift the dryer into position. Raising the front edge, push the dryer backwards until it engages with the brackets on the back of the washer. 6. Carefully lower the front of the dryer, making sure the feet fit into the plastic cups. Washer back Metal brackets 2. To ensure the dryer is correctly positioned on top of the washer, align the plastic cups with the front top edge of the washer. Stacked Installation Tumble dryer Plastic cups To position the plastic cups, break off the left tab (A) on the cup to be placed on the right side of the washer and break off the right tab (B) on the cup to be placed on the left side of the washer. 3. Remove the protective paper from the selfadhesive surface beneath the cups. Being careful not to press the adhesive surface against the top of the washing machine, use 6 Washer Total height 67". Adjustable to 69". WARNING! Never stack a washer on top of a dryer!