Asus AP110 AP110 User Manual - Page 49
Problem, Action
View all Asus AP110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Problem Action The system continuously beeps after it was turned on The message "Non-system disk or disk error" appears 1. Check the memory modules and make sure you installed the DIMMs the system supports. 2. Make sure that the DIMMs are properly installed on the sockets. Check if bootable HDD is active. RAID HDD is only detected as 1024MB 1. Boot from DOS/Win9x floppy disk. 2. Run FDISK utility to delete all partition 3. Reboot the system and run FDISK /MBR. RAID HDD shows incorrect size when you execute FDISK If the RAID set is larger than 64GB, try using SPFDISK utility to solve the problem. PCI-IDE RAID controller does not detect HDDs Press F6 and load the PCI-IDE RAID driver when booting from Windows NT/200 OS CD. Onboard IDE HDD is unstable Network connection not available Install the VIA utility drivers from the ASUS support CD. 1. Make sure the network cable is connector the RJ-45 port on the rear panel. 2. Make sure that you have installed the network drivers from the motherboard support CD. AP110 Server User's Manual 49