Asus DSBF-D 1U User Guide - Page 156

3. The following screen appears. Select a channel and press to enter the setup. LSI Logic Config Utility v6.08.05.00 (2006.08.02) Adapter List Global Properties Adapter SAS1068 PCI PCI PCI PCI FW Revision BUS Dev Fnc Slot 05 03 00 00 1.15.00.00-IR Status Disabled Boot Order 0 Esc = Exit Menu F1/Shift+1 = Help Allt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List The numbers of the channel depend on the controller. 4. The Adapter Properties screen appears. Use the arrow keys to select RAID Properties, then press . LSI Logic Config Utility Adapter Properties -- SAS1068 v6.08.05.00 (2006.08.02) Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVIDIA Version Status Boot Order Boot Support SAS1068 00 05.03.00 1.15.00.00.IR 500E0180:60831008 25.02 Disabled 0 (Enabled OS only) RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item 5. The Select New Array Type screen apprears. Use the arrow keys to select Create IM Volume, then press . LSI Logic Config Utility v6.08.05.00 (2006.08.02) Select New Array Type -- SAS1068 Create IM Volume Create Integrated Mirror Array of 2 disks plus an optional hot spare. Data on the primary disk may be migrated. Create IME Volume Create Integrated Mirrored Enhanced Array of 3 to 8 disks including an optional hot spare. ALL DATA on array disks will be DELETED! Create IS Volume Create Integrated Striping array of 2 to 8 disks. ALL DATA on array disks will be DELETED! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create 5-40 Chapter 5: RAID configuration